Graphite cloth is a kind of antifriction material developed in China on the basis of foreign samples on 90s, because of the widespread use of sander. It is also called carbon cloth abroad, and is also called Graphite Ribbon and graphite band in china.
Alias
Graphite lubricating belt.
brief introduction
graphene nanoribbon
Graphite cloth is a kind of antifriction material developed in China on the basis of foreign samples on 90s, because of the widespread use of sander. It is also called carbon cloth abroad, and is also called Graphite Ribbon and graphite band in china.
Graphite cloth is a simple process, manual production began, after years of research and development has become a clear classification, application of mature products, at present, can replace foreign products, and have been exported abroad.
classification
Graphite cloth, as a solid lubricating material, with blankets and temperature resistant foam pad applied to the sanding machine, to reduce friction between the steel plate and the belt sander sanding belt protection, improve the quality of.
Can be divided into: GC and HD, ultra-thin, backing, self-adhesive type.
Type GC and type HD
GC graphite cloth Graphite, Coated, Canvas - Standard, Type (GC) is the main raw material using 99.99% natural flake graphite. Flake graphite is dipped in coated liquid glue (which makes it easier to immerse graphite scale after heating), enters water, solidifies, dries, and finally cuts into customer size. GC graphite cloth has high lubricity, and is suitable for all kinds of light ordinary sanding machines.
The characteristics of GC type of stone Mobu:
In the selection of graphite, GC graphite cloth all use lubricating best natural flake graphite, with flexible glue, made into a flexible graphite coating and lubrication, good cheap, can apply to various sanding machine, compared with heavy graphite cloth, only used in the heavy sanding machine, because heat resistance is weak, so life is short.
HD type
HD graphite cloth Graphite, Coated, Canvas - Heavy, Duty (HD) is the main raw material using solid graphite particles and 99.99% natural flake graphite. First, the adhesive is applied on the base cloth, and the graphite particles are permeated into the adhesive by extrusion to dry. The final cut is made to the size required by the customer. HD graphite cloth has a strong abrasion resistance, and high temperature resistance, long service life, suitable for sanding, particleboard, MDF heavy sanding machine.
The friction coefficient of HD graphite cloth is GC type graphite cloth, therefore, does not recommend the use of ordinary sand machine type HD graphite cloth.
The characteristics of HD type of stone Mobu:
In the selection of graphite materials, using the technology of flake graphite and graphite particle composite, graphite particles due to expensive and complex production process is difficult, so the cost is high, the high price of the HD graphite cloth, HD graphite cloth in the production process, the use of high temperature resistance and higher bonding strength of glue, therefore, this type of the product is especially suitable for heavy sanding machine, also can be applied to other kinds of sanding machine.
Ultra-thin
Ultra-thin stone Mobu is mainly applied to the requirements of sanding surface finish.
Backing adhesive type
Backing adhesive is mainly used in simple flat sander.
