News
By pure graphite or metal plate (tooth plate, plate, net) reinforced graphite plate cutting or stamping, has many excellent sealing performance, such as thermal stability, self lubrication, corrosion resistance, not aging, not fragile, the use of long-term stability in the harsh working conditions, rarely need maintenance. Lining material with different metal plates. Typeoptionalwithoutedge, inneredge, outsourcing side, inside and outside wrapping. Graphite cut gasket is from pure graphite plate drilling or cutting and it has good corrosion resistance, high / low temperature, compression elasticity and high strength good, complex geometric gasket circular is widely used in all kinds of pipes, valves, pumps, pressure vessels, heat exchanger, and condenser generator, air compressor, exhaust pipe, refrigerator etc.. raw material An expandable graphite (graphite)…
With the continuous improvement of lubrication technology in various fields, graphite lubrication products are constantly improved. The types of graphite lubrication products are also developing rapidly. At present, the graphite lubricant is mainly divided into two types: liquid lubricant and solid lubricant. Liquid lubrication includes: Graphite lubricating oil: Based on the addition of graphite powder, graphite powder, graphite powder. The gas made from grinding, puffing, dehydration and constant temperature thermal treatment technology, the proportion of oil than graphite, infiltration of oil evenly, so that the graphite into lubrication, to reduce mechanical wear. Dry lubricant: graphite powder and two key sulfides as the main ingredient, adding volatile solvent and the amount of curing agent proportion. Then the loaded pressure cylinder (barrel),…
Details of the graphite electrode in the installation of the attention 1. 1 The electrode before connecting the first thread to clean the electrode. In the end of the connector is screwed into the electrode carefully, the hoisting joint is screwed into the electrode at the other end, no collision threads do not recommend electrode joints being used directly into the road. 2. 2 Absolutely not allowed to use the steel wire group or a wire brush, cleaning cloth thread electrode, not only use compressed air to remove oil and water. 3. 3 Absolutely not allowed to use the steel wire group or a wire brush, cleaning cloth thread electrode, not only use compressed air to remove oil and water…
